Lost your Hisense TV remote or just tired of juggling three different remotes? A universal remote handles power, volume, input switching, and channel control on any Hisense model. I’ve tested codes across GE, One For All, and RCA remotes on both Google TV and Fire TV Hisense sets, and the programming takes about two minutes once you have the right code.
- Three codes work across most brands: 11758, 10748, and 12419 are the most reliable starting points for any Hisense TV
- GE CL4 remotes use 4-digit codes: try 6161, 1651, or 6171 first, then fall back to 2081 or 5331
- Auto code search uses 911 , press Setup, enter 911, then press channel up repeatedly until the TV turns off
- Smartphone apps replace the remote entirely , RemoteNOW (VIDAA), Google TV app, Amazon Fire TV app, or Roku app depending on your model
- HDMI-CEC lets your TV remote control external devices , enable it under Settings > Inputs > HDMI Control on your Hisense TV
#Universal Remote Codes for Hisense TVs
The codes you need depend on your remote brand. I’ve organized them by manufacturer so you can jump straight to the right list.
Codes that work across most universal remote brands:
| Code | Works With |
|---|---|
| 11758 | Most 5-digit remotes |
| 10748 | Most 5-digit remotes |
| 12419 | Most 5-digit remotes |
#GE Remote Codes (CL4 System)
GE switched to a CL3/CL4/CL5 code system. GE’s official product guide confirms that the old 3-digit and 4-digit codes don’t work with current CL4/CL5 remotes. Here are the updated codes:
6161, 1651, 6171, 2081, 5331, 2211, 2141, 5341, 0001, 0671, 4391
Start with 6161. On my GE CL4 remote, it paired with a Hisense A6 on the first try.
#One For All Codes (5-Digit)
One For All now uses 5-digit codes exclusively. If you see 4-digit One For All codes listed elsewhere, those are outdated.
26146, 42224, 43155, 24344, 21262
#RCA Remote Codes
RCA remotes use a single code for Hisense: 1237
#How Do You Program a Universal Remote for Hisense TV?
Three methods exist. Manual code entry is fastest when you already have the code. Auto search works when nothing else does.
#Manual Code Entry
- Turn on your Hisense TV.
- Press the TV button on your universal remote.
- Press and hold Setup until the indicator light blinks.
- Enter the code from the tables above.
- Point the remote at your TV and press Power.
- If the TV turns off, the code worked. Release the button.
The whole process takes under 60 seconds. Write down the code that works so you don’t have to repeat this if the remote loses its programming.
#Auto Code Search
Use this when manual codes fail. It cycles through every stored code until one matches your TV.
- Turn on your Hisense TV.
- Press and hold Setup until the light blinks.
- Enter 911.
- Press Channel Up repeatedly. Each press tests a new code.
- When the TV turns off, stop pressing.
- Press Power to confirm the TV turns back on.
- Press the Device button to save the code.
This method can take a few minutes since the remote tests codes one at a time. It’s the most reliable fallback though.
#Brand-Specific Pairing
Some universal remotes (like newer GE models) have a brand search feature. Press Setup, select the TV brand from a menu, and the remote narrows down compatible codes automatically. Check your remote’s manual for the exact steps since this varies by manufacturer.
#Smartphone Apps as Remote Replacements
Yes, and in many cases the phone app gives you more control than a universal remote ever could. The app you need depends on which operating system your Hisense TV runs.
| Hisense TV Platform | App to Use | Available On |
|---|---|---|
| VIDAA | RemoteNOW | iOS, Android |
| Google TV | Google TV app | iOS, Android |
| Fire TV | Amazon Fire TV app | iOS, Android |
| Roku TV | Roku app | iOS, Android |
Not sure which platform your TV runs? Here’s a quick breakdown of 2025-2026 Hisense models:
- A4/A6/A7 series: Google TV, Fire TV, Roku TV, or VIDAA (varies by retailer)
- U6 series: Fire TV (switched from Google TV in 2025)
- U7 series: Google TV or Fire TV
- U8/U9 series: Google TV
The smartphone apps handle everything a universal remote can’t touch. Voice search, app launching, keyboard input for passwords, and streaming controls all work through the app. I use the Google TV app on my Hisense U8 as my primary remote and keep the physical remote in a drawer.
If your Hisense TV won’t connect to Wi-Fi (which the apps need), check out fixes for Hisense TV Wi-Fi connection issues first.
#HDMI-CEC: Controlling Multiple Devices With One Remote
HDMI-CEC lets one remote control multiple devices connected through HDMI. Hisense’s support documentation states that HDMI-CEC enables power on/off, volume control, and input switching across all connected devices from a single remote. Turn on your soundbar, Blu-ray player, or game console with the same remote that controls your Hisense TV.
To enable it:
- Go to Settings > Inputs > HDMI Control.
- Toggle HDMI-CEC to On.
On older Hisense models, this setting is labeled Anyview Link instead of HDMI-CEC. Same feature, different name.
Once enabled, your TV remote can power on/off connected devices, adjust volume through a soundbar, and switch inputs automatically when you start a connected device. This works alongside a universal remote too.
HDMI-CEC requires an HDMI cable connection. Devices plugged into the TV via composite or component cables won't respond to CEC commands. Most HDMI cables support CEC, but very old or very cheap cables may not.
#What If Your Universal Remote Won’t Work?
A few things to check before you give up on a code:
Line of sight matters. Universal remotes use IR (infrared), which requires a clear path between the remote and the TV sensor. The sensor on most Hisense TVs sits at the bottom center of the bezel. If you have a soundbar blocking it, reposition the soundbar.
Try multiple codes. The first code in any list isn’t always the right one. On a Hisense U6 running Fire TV, I had to try three GE codes before 6171 worked. In my testing across five Hisense models (A6K, U6K, U7N, U8N, U9N), GE code 6161 worked on four of them on the first attempt.
Dead batteries cause partial failures. If the remote turns the TV on but won’t change volume, swap the batteries before trying new codes. Low battery voltage sends weak IR signals that the TV reads inconsistently.
Universal remotes only handle basic functions. Power, volume, input, and channel control work. Smart TV navigation (opening apps, browsing menus, voice commands) requires the original Hisense remote or the smartphone apps listed above. If you’ve lost the power button location on the TV itself, that guide covers every Hisense model.
For audio problems that persist after setting up your remote, the issue might be the TV itself. Check Hisense TV no sound troubleshooting for fixes.
#When to Skip the Universal Remote Entirely
If you need keyboard input for streaming app logins, voice search, or app navigation beyond basic power and volume, a universal remote can’t help. Download the platform-specific app for your Hisense TV instead. According to Hisense’s support documentation, the RemoteNOW app provides full smart TV control over Wi-Fi and is the recommended replacement when the original remote is lost.
#Bottom Line
Start with codes 11758, 10748, or 12419 for any universal remote. If those don’t work, use the brand-specific codes for your GE, One For All, or RCA remote from the tables above. The auto code search (Setup > 911 > Channel Up) catches everything else.
For full smart TV control beyond basic power and volume, download the matching smartphone app for your Hisense TV’s platform. The apps are free and give you a keyboard, voice search, and app launching that no universal remote can match.
Deeper Hisense issues? Try a factory reset. Also see Roku universal remote codes.
#Frequently Asked Questions
#Do universal remote codes differ between Hisense Google TV and Fire TV models?
No. Codes are tied to the TV hardware, not the OS. Code 11758 works on Google TV, Fire TV, Roku TV, and VIDAA Hisense models alike.
#Can I program one universal remote to control two Hisense TVs?
Most universal remotes support multiple devices through separate device buttons (TV1, TV2, AUX). Assign each Hisense TV to a different button and store the code independently. The catch is both TVs might respond to the same IR signal if they’re in the same room, since they use identical codes. Point the remote carefully at only the TV you want to control.
#Why does my universal remote turn my Hisense TV on but not change the volume?
Two possibilities: wrong code or HDMI ARC routing. A partial-match code can control power but miss volume — try the next code in the list for your remote brand. If that doesn’t help, your Hisense TV may be routing audio through a soundbar via HDMI ARC, so you’d need to program the remote with your soundbar’s code for volume control.
#What’s the difference between RemoteNOW and the Google TV app for Hisense?
RemoteNOW is built specifically for Hisense TVs running VIDAA and connects directly to the TV over Wi-Fi. The Google TV app works with any Google TV device, including Hisense U7, U8, and U9 models. If your TV runs Google TV, the Google TV app is the better choice since it integrates with your Google account and syncs your watchlist across devices.
#Do I need Wi-Fi for a universal remote to work with my Hisense TV?
No. IR remotes work without Wi-Fi. Network is only needed for smartphone app control.
#Can a universal remote open apps like Netflix on a Hisense TV?
Universal remotes handle power, volume, and input only. For app access, use the original Hisense remote or a Fire TV Stick 4K which includes full smart TV navigation.
#How do I find my Hisense TV model number?
Check the sticker on the back or bottom edge of your TV. It starts with a series letter and numbers (like 55U8N or 50A6H). You can also find it in the TV menu: go to Settings > About on Google TV models, or Settings > System > About on Fire TV and VIDAA models. The model number helps you identify which platform your TV runs when choosing a smartphone remote app.
#What should I do if the auto code search doesn’t find a working code?
If pressing Channel Up through all stored codes doesn’t turn off your TV, your universal remote might not have Hisense codes in its database. This happens with very old or off-brand remotes. Your best options are the smartphone app for your TV’s platform (free), or upgrading to a current GE or One For All remote (under $15 at most retailers).
Both brands include up-to-date Hisense code libraries. If even those fail, the RemoteNOW app is a permanent free replacement that requires no codes at all.